(GYPSUM/LIME/FERTILIZER)
The Adams low profile combo spreader is the same as our popular HLS-3 model; however, the HLS-3-LP is 8” lower to accommodate orchards with height restrictions. The HLS-3-LP is a multi-functioning unit that allows for the application of Gypsum, Lime or Fertilizer.The combo spreader is designed for tractor hydraulics. The spinner assemblies on these units are designed as an attachment, which makes them easy to take on and off of the unit when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

BROCHURES & SPECIFICATIONS:
  Adams HLS-3-LP


STANDARD FEATURES & SPECIFICATIONS:
• 84 cubic feet capacity
• 304 stainless steel hopper construction
• Single axle – 2 wheel
• 14.5/75-16.1 tires
• 10-bolt hubs
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable attachment)
• Hopper dimensions: length 120” x width 72"
• Overall dimensions: length 212" x width 80” x height 58"
• Heavy duty 4 X 4 jack
• Powder coated frame - black in color
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Stake pocket and hopper extensions included for more capacity - wood not included
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt, 10 gauge mild steel frame,
   dual hydraulic drive motors, full length sealer strips, powder coated-black paint
• Drive sprocket shield

(GYPSUM/LIME/FERTILIZER)
The Adams combo spreader, specifically designed for Big W Sales, is a multi-functioning unit that allows for the application of Gypsum, Lime or Fertilizer. The combo spreader is designed for tractor hydraulics. The spinner assemblies on these units are designed as an attachment, which makes them easy to take on and off of the unit when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

BROCHURES & SPECIFICATIONS:
Adams HLS-3


STANDARD FEATURES & SPECIFICATIONS:
• 84 cubic feet capacity
• 304 stainless steel hopper construction
• Single axle – 2 wheel
• 21.5 x 16.1 flotation turf tires
• 10-bolt hubs
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable   attachment)
• Hopper dimensions: length 120" x width 72“
• Overall dimensions: length 212" x width 86” x height 62"
• Heavy duty 4 X 4 jack
• Powder coated frame - black in color
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
• Stake pocket and hopper extensions included for more capacity - wood not included
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt, 10 gauge mild steel frame, dual hydraulic drive
   motors, full length sealer strips, powder coat black paint (interchangeable attachment)
• Drive sprocket shield

The Adams 5-ton, pull-type fertilizer spreader has a manual ground driven engagement assembly that makes it easy to use and operate. A PTO and hydraulic operated option are also available for those customers that prefer PTO or hydraulic operated spreaders.

BROCHURES & SPECIFICATIONS:
  Adams 5 Ton


STANDARD FEATURES & SPECIFICATIONS:
• 5-ton (180 cubic feet) capacity
• 304 stainless steel hopper construction
• 50 ft. Fertilizer spread pattern
• 30 ft. Lime spread pattern
• 16” 304 stainless steel mesh conveyor chain
• Twin 24” fans
• 12.5L x 15 flotation tires
• Hopper dimensions: width 104” length x 80” height x 83”
• Bolt-on hopper assembly
• Tandem axle – 4 wheel
• Heavy duty jack
• Clevis type hitch
• Dual spinners
• Ground drive
• Powder coated frame - black in color
• Tow safety chains
• 2” X 6” rectangular tube chassis construction
OPTIONAL FEATURES:
• PTO driven unit
• Hydraulic floor chain shutoff (PTO version only)
• All hydraulic option which includes hydraulic spinners with flow control valve, hydraulic engaging wheel   (operates the drag chain), tractor hydraulic package(2 hoses/1 remote required), no PTO

The Adams high clearance was designed for those application needs that require a unit with more ground clearance than the standard pull-type spreaders. This unit has a 30” ground clearance and has adjustable axles to fit either 60” or 80” rows. In addition, the Adams HLS-MHC spreader can be used to spread Gypsum, Lime, Fertilizer, or Compost. The spinner assemblies on the HLS-MHC units are designed as an attachment, which makes them easy to take on and off when other application needs are required. A custom designed conveyor belt banding unit and banding diverter are available as options, which make this one of the most diverse spreaders on the market today.

BROCHURES & SPECIFICATIONS:
  Adams HLS-6-MHC


STANDARD FEATURES & SPECIFICATIONS:
• 6 ton capacity (200 cubic feet)
• 304 stainless steel hopper construction
• Powder coated frame - black in color
• Single axle – 2 wheel
• 50 ft. Fertilizer spread pattern
• 30 ft. Lime spread pattern
• 16” wide 304 stainless steel mesh conveyor chain
• Dual hydraulic spinners - 24” (interchangeable   attachment)
• 11.25 x 28 wheels/tires
• 10-bolt, 12,000 lb. hubs
• Hopper dimensions: length 120" x width 96“
• Overall dimensions: length 214" x width 96” x height 90"
• 30” ground clearance
• Heavy duty 4 X 4 jack
• Adjustable clevis type hitch
• Adjustable material distribution chute
• Hydraulic engaging steel wheel (operates the drag chain)
OPTIONAL FEATURES:
• Banding diverter (interchangeable attachment)
• Belt bander attachment -18” PVC belt,
• 10 gauge mild steel frame, dual hydraulic drive motors, full length sealer strips,powder coat black paint

New Leader® L4000G4 is a culmination of the best of the best! The design of the L4000G4 provides modular hydraulic packages to suit your spreading needs, plus the ability to add a second, third or fourth bin at any time with the addition of the MultApplier or MultiBin.


The customizable L4000G4 is designed to meet your needs. Choose between a 13' or 14' body length; painted 409 stainless steel or non-painted 304 stainless steel and a #4 belt-over-chain or a #3 pintle chain - all depending on your capacity and spreading needs. You can further customize your until with either standard hydraulics or high performance hydraulics and add a MultApplier, MicroBin or MultiBin and spread multiple products in one pass. The L4000G4 standard body width is 102” (258cm) with 6” (15cm) side extensions, and includes a bolted-in rear end gate for greater structural integrity. The L4000 G4 uses the best components as standard equipment. New Leader carefully sources, manufactures and tests every component to maximize the swath width and ensure the most accurate spread pattern.

The New Leader® L5034G4 is the best built and most versatile compost spreader in the industry. The extra wide 34” (86cm) conveyor and 50° side slopes provide better flow of material and increased output, and the 118” (300cm) wide body increases payload capacity for heavy spreading needs. The non-corrosive stainless steel conveyor floor prevents material build-up under the conveyor, providing longer service life to the overall conveyor system.


The L5034G4 also features dual 30” (76cm) spinners and tandem hydraulic pumps to broadcast material faster and farther, and minimize time in the field. Compared to the average compost spreader, spinner power is increased by up to 50% and application rates are increased up to 33% or more. The L5034G4 compost spreader uses patented technology to spread material farther, wider, and more consistently than any other applicator. With higher payload capacity and greater material output, precise record-keeping of environmental material applications lets you get the job done more accurately in less time.

Hopper

• 230 cu. ft. (200 cu. ft. and 30 cu. ft. if second metering system is used)
• 409 stainless steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
• Roll tarp installed

Booms

• 60 ft, 57 ft. or 54 ft. spread width
• Rubber torsion boom suspension
• 304 stainless steel construction
• Break away tips
• 3 in. diameter tubes (6 per side)
• 2 deflectors per tube

Metering

• (2) 12 in., stainless steel conveyor chains
• 15:1 final drive gearbox ratio
• Ground drive metering
  • One way clutch allows you to back up with metering drive engaged
  • 1.5 ratio gearbox equipped with reversible gears provides an additional 2X gear range
  • 30 speed gearbox with 7% between settings
  • Oil bath gearboxes
• Hydraulic metering drive options
  • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice. Does not include radar, servo valve, encoders, controller/monitor, cables etc.
  • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
  • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

Fan

• 17 in. impeller operates at 4700 RPM
• 9 in. outlet
• PTO fan drive
  • 1000 RPM CV, 13⁄8 in. 21 spline driveline
  • 1.5 ratio PTO gearbox
  • 4 band belt with tightener
  • 14:4.5 pulley ratio
• Optional hydraulic fan drive
  • 28 CC motor, direct drive
  • Requires 35 GPM operating at 2225 PSI
  • 38.5 in. water column manifold pressure
  • 3/4 in. hydraulic lines
  • 3/4 in. couplers recommended
  • Case drain required

Hydraulics

• 3 outlets required to operate standard functions
  • Boom fold and lock
  • Engage metering drive wheel
  • Operate half shut off on right boom
• Requires additional remotes for optional hydraulic drives for fan and metering

Chassis

• 72-120 in. adjustable axle
• Single 3.5 in. axle with 10 bolt hub
• 12.4-38 (320/85), 23.1-26 R1 orR3, 28L-26 (750/65) R1 tire sizes available

Second Metering System

• 30 cu. ft. hopper (moveable panel allows you to utilize either entire 230 cu. ft. hopper or 30 cu. ft./200 cu. ft. split)
• (2) 12 in., 28 groove metering rollers
• 60 speed metering gearbox with 5% between settings
• In-cab electric clutch control with 1⁄2 shut off on either side

Dimensions/Shipping Information

• Total weight 7000 lb.
  • Transport: Hitch 1040 lb., Axle 5960 lb.
  • Field: Hitch 1360 lb., Axle 5640 lb.
• 9 ft. 10 in. Transport width
• 11 ft. 6 in. Transport height

Hopper

• 170 cu. ft.
• 1 piece, 409 stainless steel construction with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
• Hopper bottom shut-off slide panels
• Roll tarp installed

Booms

• Available in 40 ft. or 36 ft. spread
• 304 stainless steel construction
• Break away boom tips
• 2.5 in. diameter tubes
• 6 deflectors per side
• Manual fold
• Self levelling

Metering System

• 304 stainless metering bottoms with 6 outlets per side
• 304 stainless steel, self cleaning metering rollers
• Manual half width shut-off on either side
• Rates up to 500 lb./acre at 5 MPH down to 5 lb./acre with optional small seed and herbicide kit
• Ground drive
  • Hydraulically engaged
  • 60 speed gearbox with 5% between settings
• Hydraulic metering drive options
  • A basic drive supplied with hydraulic motor only for completion by customer with system of their choice – does not include radar, servo valve, encoders, controller/monitor, cables etc.
  • A Rawson AccuRate® Drive complete with hydraulic lines that is compatible with many of today’s GPS systems
  • A complete Raven System such as Viper Pro®, Envizio Pro® or SCS 660®

Fan

• 20 in. impeller
• 2-5 in. fan outlets
• PTO fan drive
  • 1000 RPM CV driveline, 13⁄8 in. – 21T spline
  • 19:4.12 pulley drive ratio
  • 4 band belt with spring loaded idler tensioner
• Optional hydraulic fan drive
  • 32 CC motor requires 23 GPM operating at 1885 PSI
  • 3/4 in. hydraulic lines
  • 3/4 in. couplers recommended
  • 30 in. water column manifold pressure
  • Case drain required
  • 6.9:4.12 pulley drive ratio

Hydraulics

• Requires 1 remote to engage metering system
• Requires 2nd remote for optional hydraulic boom fold
• Requires additional remotes for optional hydraulic drives for fan and/or metering

Chassis

• Tandem walking beam
  • Adjustable axle width with available tires: 16.5L x 16.1 (81-99 in.) or 9.00 x 20 (72-90 in.)
  • 2.5 in. axles with 6 bolt hubs
• Single axle
  • 550/60-22.5 tires/12 ply at 90 in. center to center
  • Tire Dimensions – width 550 mm (21.7 in.)/OD – 1238 mm (48.7 in.)
  • 2.75 in. axles with 8 bolt hubs

Options

• Herbicide kit includes 1 set of 28 groove metering rollers and fan intake reducer for metering finer products and lower rates
• Foam or disc marking systems
• Extension kit to extend 36 ft. boom to a 38 ft. spread
• Hydraulic boom fold
• Hopper screen assembly

Dimensions/Shipping Information

• Height: 8 ft. 6 in.
• Width: 8 ft. 6 in. (9 ft. 2 in. with single axle)
• Length: 17 ft. 3 in.
• Weight: 4360 lb.

Hopper

• 40 cu. ft.
• Mild steel with 2 component epoxy primer and 2 component cross linked acrylic top coat paint system
• Weather tight lid
• Product level sight gauge
• Hopper bottom shut-off gates

Booms

• 50 ft. spread, breakaway tips
• Self levelling
• Manual fold
• 1.5 in. OD tubes, 12 outlets per side

Metering

• Ground driven
• Half shut off on either side
• 28 groove plastic fluted metering roller – 12 groove available for more coarse material or higher rates
• In-cab electric clutch control and air manifold monitor
• 60 speed gearbox with 5% between settings
• Air manifold and venturi system drop for easy cleaning

Fan

• Hydraulic drive:10.5 GPM – hydraulic lines to hitch included
• 11 HP gas engine fan drive
• PTO: 540 or 1000 RPM with 540 RPM PTO shaft standard
• 18 in. impeller with 4 in. outlet
• Operates at 3200-4000 RPM

Chassis

• 6000 lb. rubber torsion axle
• 6 bolt hubs
• 12.5 L – 15 in. tires

Options

• 12 groove roller assemblies for coarse material

Hopper

• 185 cu. ft., 6 ton capacity
• 409 stainless steel with a 2 component epoxy primer and a 2 component cross-linked acrylic top coat
• Product level sight gauge
• Easy to use lid on linkage and track opener
• Opening size – 51 in. wide x 37 in. deep
• Available bin screen
• Hopper bottom shut-off slide gates
• Standard mounting legs and hardware – may require modification by customer

Fan

• Single inlet radial blade with 18 in. impeller
• Operates at 5500 RPM
• Fan outlet pressure of 32 in. water column
• 12 CC displacement hydraulic, axial piston motor
• 17 GPM hydraulic flow, case drain required
• 1800 PSI
• 16 HP

Metering and delivery system

• Individual venturi, open feed system
• (2) 304 stainless steel metering assemblies
• 8, 12 or 16 outlets
• 4 in. diameter, 12 groove, 304 stainless metering roller
• 400 lb./acre @ 6 MPH at 30 in. row spacing
• 40-650 lb. per acre metering range
• 2 in. ID flex hose
• 60 speed gearbox at 5% increments, or hydraulic motor metering drive for use with VRT
• Optional Rawson AccuRate® drive with hydraulic lines on hopper compatible with most GPS systems
• Optional air diffuser kit available for 8, 12 or 16 rows

Dimensions

• Height of 84 in.
• Width of 94 in.
• Depth: 80 in. hopper, 102 in. overall including ladder and platform
• Weight (empty) of 1510 lb.