Page 91 - 2022 Online Catalog

www.bigwsales.com

DirectoValve Manual Control Valves

Model 6B
• Molded of corrosion resistant materials; all wetted parts are
polypropylene, stainless steel and polyethylene.
• Maximum pressure of 150 PSI (10 bar).
• Flow Rate: 12 GPM (47 l/min) at 5 PSI (0.34 bar) pressure drop,
17 GPM (64 l/min) at 10 PSI (0.69 bar) pressure drop.
• Molded-in mounting flange and 1/4" NPT gauge port.
• Valves can be ganged together using hex nipple for multiple
boom control.
• Easily repaired without removing valve from spray line.
3/4" Inlet
Connections
How to Order: Molded-in
Gauge Port
Example: AA6B
1/2" Boom
Connection
TeeValve Control Valves

For Selective Control of Three-Section Boom
Sprayers at Pressures up to 300 PSI (20 bar).
• Use to open any of three boom section lines in any
desired combination. 1/4" NPT Pressure
• Raise lever to open, lower lever to close the valve Gauge Port VALVES
without changing the indexed position. Side connection for
• Aluminum construction with stainless steel and bypass and pressure
plastic internal parts for maximum corrosion “A” Index Setting relief valve is
resistance. interchangeable with
spray gun connection.
PART NO MATERIAL MAX PRESSURE INLET (3) BOOM OUTLETS ACCESSORY OUTLET

TEEVALVE CONTROL VALVES
AA17Y Aluminum, Polymer, Stainless Steel 300 PSI (20 bar) 1" NPT 3/4" (F) 3/4" (F)
AA17L Aluminum, Polymer, Stainless Steel 300 PSI (20 bar) 3/4" NPT 3/4" (F) 3/4" (F)

TeeValve Throttling Valves

For regulating flow in systems equipped with centrifugal pumps where sensitive regulation is
required or to control flow in jet agitator return lines. Locknut holds pressure setting firmly in place.

Type 23520 Type 12690 Type 12795
• Polypropylene construction for • Pressures to 125 PSI (9 bar). • Pressures to 150 PSI (10 bar).
excellent chemical resistance. • Constructed of Nylon, Celcon®, • Available in brass, aluminum
• Pressures to 150 PSI (10 bar). aluminum, steel and SS or ductile iron.
• 1/2" and 3/4" NPT or BSPT connections. • 1/2" or 3/4" NPT connections. • 1", 1-1/4" or 1-1/2" NPT connections.
• 10 PSI (0.6 bar) pressure drop at 6 GPM • Maximum flow rate at 100 PSI (7 bar) • Flow rate at 40 PSI (3 bar) is 116
(37.8 l/min) flow rate for 1/2"; 18 GPM is 56 GPM (212 l/min) for 1/2" and GPM (440 l/min) for 1"and 1-1/4"
(69 l/min) for 3/4". 82 GPM (310 l/min) for 3/4". and 172 GPM ( 651 l/min) for 1-1/2".

How to order: How to order: How to order:
Example: Example: Example:
23520-1/2-PP 12690-1/2-NYB 12795-1

Stockton, CA Fresno, CA Salinas, CA Yuma, AZ Stockton, CA Fresno, CA Salinas, CA Yuma, AZ 89
800-922-7253 800-532-0253 844-755-2410 800-752-2636 800-922-7253 800-532-0253 844-755-2410 800-752-2636